• 0.5mm 구간마다 좁은 범위에서 가장 오차가 큰 구간값 (정도 표시)

Model	D-50	D-50S	D-100	D-100S
Range	50mm		100mm
Resolution	0.005mm (0.01mm)	0.001mm	0.005mm (0.01mm)	0.001mm
Accuracy (excluding quantized error)	0.01mm	0.004mm	0.01mm	0.005mm
Measuring force	Less than 3.0N		Less than 3.5N
Cable length	2m
Mounting method	Ø20mm stem or fastening by M4 screws at two positions
Contact point	M2.5 × 0.45 Sø 2.4mm steel
Operating temperature	0 - 40℃
Weight	450g		520g
Output signal	90º phase difference, 20µm pitch (R03-PB8M Tajimi connector)
Suitable counter	C-500/C-700
	C-5 Discontinued (Only stock is supplied)	C-5S Discontinued (Only stock is supplied)	C-5 Discontinued (Only stock is supplied)	C-5S Discontinued (Only stock is supplied)
	CP-5 Discontinued	CP-5S Discontinued	CP-5 Discontinued	CP-5S Discontinued
Accessories	* Finger lever for lifting spindle ---- 1 pc
Featuares	* If Spindle inner spring is removed, measuring force will be that of spindle itself (only when in upright position) * D-50, D-50S ---- 1.0N (100gf)         D-100, D-100S ---- 1.0N (110gf) * Recommended stand is PDS-2
Options	* Level mounting clamp (GB-50) * Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted.